2012年12月12日星期三
Reduce tire wear V-Checker V500 tips
Pressure to compliance
Driver in accordance with the provisions of the V-Checker V500 depot to the tire inflation. When the tire pressure is lower than the standard value, the wear of the tire shoulder increases sharply;, due to the decrease in the ground contact area of the tire when the tire pressure is higher than the standard value, the unit pressure increased, so that the tire tread central increased wear, while increasing the tire rigidity. dynamic load load increases, the wheels are prone carcass burst.
Tread no cracks
Regularly check the tire surface cracks, deformation and other defects. Tire groove travel wear faded, the polished will lose drainage non-slip, the car of the performance will be greatly reduced, while seemingly small crack high speed flat tire hazard. Moreover, you should pay attention to the timely removal of the groove in the gravel.
Parking election plains
To avoid the vehicle parked in the coarse, sharp or sharp stones on the road. Vehicles do not park close to or in contact with petroleum products, acids, and other places affect the the rubber deterioration of materials. Driver do not turn the steering wheel after parking, this Volvo PROSIS operation will accelerate tire wear.
Heat do not splashing
Easily overheated when the tire driving or high speed a long time in summer, while increased pressure. You should stop cooling, the non bleed buck or splashing water cooling, in case of non-normal aging of the tread rubber.
订阅:
博文评论 (Atom)
没有评论:
发表评论