2012年9月27日星期四

Optimized shift pattern OBD2 Scanner Code file manually driving


Control the clutch Note:

1, the correct posture clutch feet step on the clutch pedal on the heels close to the ground, knees slightly bent when the clutch stepped lowest point. Never toes stampede edition or the heel off the ground to avoid the strength is not enough or decline.

Clutch, to step on the minimum (floor), avoid prolonged in an engaged state, so that you can ensure that the clutch is fully separated, and will not wear.

The car, the clutch should not put too fast or deliberately engine agency upgrade too high, which will accelerate the loss of the clutch.

4, never step on the the low clutch when shift.

5, the clutch should release it.

6, the hand failed smoothly shift, you can release the clutch, then the clutch, then shift, and not forcibly shift, or make gearbox gear friction.

7, driving, not to the right foot on the clutch.
When is the best time to shift? This is a problem often encountered in many car drivers manually. Many people think that the the silent shift is correct, so the engine has not yet reached the the most needed shift revolutions blind shift, so the idea is not a bad idea, just compare fuel. Because of the low number of revolutions, the driver must increase the amount of oil, in order to maintain normal power output, In fact, the engine speed lane near peak torque output is the most fuel-efficient.
To 1.5 liters displacement of the family car on a flat road walking, for example, the best time to shift roughly as follows:

1 block off: about 1500rpm

1 block turn 2 block: 20km / h

2 block turn 3 block: 30km / h


Block 3 to 4 gear: 40km / h

4-speed turn 5-speed: 50km / h

没有评论:

发表评论